Contact Advantech Search Shopping list
  1. Ingresar

PC Bus Cards

Results per page 91872 | Sort by Price Highest / Lowest
Page 1 of 2
PCI-1220U-AE
CIRCUIT BOARD, 2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear interpolation function
  4. 2-axis circular interpolation function
  5. Continuous interpolation function
  6. Programmable T/S-curve acceleration/deceleration rate
  7. Up to 4 Mpps output for each axis
  8. Two pulse output types: CW/CCW or pulse/direction
  9. Up to 1 MHz encoder input for each axis
  10. Two encoder pulse input types: A/B phase or up/down
  11. Constant speed control
  12. Position management and software limit switch function
  13. BoardID™ switch

US$471.00

Comparar Mas
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

US$852.00

Comparar Mas
PCI-1245L-AE
CIRCUIT BOARD, Basic 4-Axis SoftMotion Controller
  1. Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode
  2. Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
  3. Supports 2 axis linear interpolation
  4. Supports T/S-curve
  5. Supports speed override
  6. Hardware emergency input
  7. Watchdog timer

US$305.00

Comparar Mas
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

US$1,065.00

Comparar Mas
PCI-1285-AE
8-Axis DSP-Based SoftMotion Controller PCI Card
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation, E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  5. Watchdog timer, Position latch
  6. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP
  7. Supports gantry mode by semi-closed loop pulse train control
  8. RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes

US$1,217.00

Comparar Mas
PCI-1784U-AE
4-Axis Quadrature Encoder & Counter Card
  1. Four 32-bit up/down counters
  2. Single ended or differential inputs
  3. Pulse/direction and up/down counter
  4. x1, x2, x4 counts for each encoder cycle
  5. Optically isolated up to 2,500 VDC
  6. 4-stage digital filter with selectable sampling rate
  7. On-board 8-bit timer with wide range time-base selector
  8. Multiple interrupt sources for precision application
  9. 4 isolated digital input
  10. 4 isolated digital output
  11. BoardID™ switch

US$399.00

Comparar Mas
APAX-5080-AE
4/8-ch High Speed Counter Module
  1. Supports multiple operating modes: 1.Up mode 2.Up/Down mode 3.Pulse/Direction mode 4.A/B Phase mode 5.Frequency mode
  2. 4 or 8 counter channels depends on operating modes
  3. 32-bit counter range with 1 bit overflow/underflow
  4. 1 MHz counter frequency
  5. 4 digital input channels with counter gate functionality
  6. 4 digital output channels with counter alarm output functionality
  7. Over voltage, short circuit and thermal protection design

US$314.00

Comparar Mas
AMAX-1220-AE
Open Frame 2-Axis Motion Module
  1. End limit logic is switchable (high or low active)
  2. BoardID is switchable
  3. Easily visible LED indicators on board to do diagnosis.
  4. Direct wire to servo drive to save terminal board space while installation.
  5. Max. 6.5 MHz, 4-axis pulse output
  6. 28 bits counter for incremental encoder
  7. Horizontal installation for for servo or stepping motor driver
  8. Suitable for DIN-rail mounting

US$468.00

Comparar Mas
AMAX-1240-AE
Open Frame 4-Axis Motion Module
  1. End limit logic is switchable (high or low active)
  2. BoardID is switchable
  3. Easily visible LED indicators on board to do diagnosis
  4. Direct wire to servo drive to save terminal board space while installation
  5. Max. 6.5 MHz, 4-axis pulse output
  6. 28 bits counter for incremental encoder
  7. Horizontal installation for for servo or stepping motor driver
  8. Suitable for DIN-rail mounting

US$732.00

Comparar Mas
Page 1 of 2
Hablar con un Representante Ahora!

Por favor ingrese su información aquí debajo, y uno de nuestros representantes los contactara a la brevedad

Verificationtxt Result  Captcha Change

Respetamos su privacidad y mantendremos su información personal completamente confidencial como expresamos en nuestra política de privacidad

Copyright © 1983–2016 Advantech Co., Ltd. All Rights Reserved