Contact Advantech Search Shopping list
  1. Ingresar

Data Acquisition Modules

Advantech's data acquisition modules and Ethernet Remote I/O modules provide ideal industrial control and measurement solutions for harsh environments and demanding applications. With wide operating temperature ranges and multiple mounting methods, Advantech's ADAM series, such as RS-485-based and ethernet I/O, can be implemented in diverse applications. The Advantech ADAM-3000 series consists of cost-efficient, field configurable, isolated signal conditioning modules that can be easily installed to protect instruments and signals from the harmful effects of electrical interference.
Results per page 91872 | Sort by Price Highest / Lowest
Page 1 of 2
6-ch RTD Module with Modbus
  1. 6-channel 2 or 3 wires RTD Input
  2. Accept Pt100/1000, Balco500, Ni input signals
  3. Channels configurable for different types of input individually
  4. Wiring burned-out detectable function
  5. 3000 VDC A/D to logic isolation


Comparar Mas
4-Ch AO Module w/ Modbus
  1. 12-bit resolution
  2. Software configurable for mA or V output in individual channels
  3. 4 digital inputs for latch output
  4. 3000 VDC D/A to Logic isolation
  5. Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec.


Comparar Mas
16-Ch Isolated DI Module w/ LED & Modbus
  1. 16 digital input channels
  2. Digital input for dry contact or wet contact
  3. Input Voltage level: 10~15 Vdc
  4. Over voltage protection: 70 Vdc
  5. 2,500 Vdc optical isolation


Comparar Mas
12-Ch Sink Type Isolated DO Module w/ Modbus
  1. Sink Type: Digital Output
  2. Digital Output: Open collector to 40V (200 mA max. load)
  3. 12 Channels
  4. I/O Type: Sink Type Output


Comparar Mas
12-Ch Source Type Isolated DO Module w/ Modbus
  1. DO Source Power Failure Detection
  2. I/O Type: Source Type Output
  3. 12 Channels
  4. Digital Output: VCC: 1-~35 Vdc, Current: 1A (per ch.)
  5. Over Current Detection


Comparar Mas
8-Ch Relay Output Module w/ Modbus
  1. I/O type: 8 channels from C (NO/NC selectable)
  2. Contact rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A, DC: 30 V @ 2 A; 110 V @ 0.6 A
  3. Switch Time: Relay on time (typical): 3 msec, relay off time (typical): 1 msec.
  4. LED Indicators
  5. Supports Modbus/RTU protocol


Comparar Mas
8-Channel Analog Input Module
  1. Communication Interface: RS-485, Micro USB, Passive UHF RFID
  2. 8 differential and independent configuration channels
  3. Broader operating temperature range
  4. LED display allows to monitor the status address settings
  5. Higher noise immunity: 4 kV surge protection on power inputs, 4 kV EFT, and 8 kV ESD protection
  6. Broader power input range: 10 ~ 48VDC
  7. Supports 200 VDC high common mode voltage
  8. Supports unipolar and bipolar input
  9. Supports ± 15 V input range


Comparar Mas
Wide-Temp RS-422/RS-485 Repeater
  1. Wide Operating Temperature: -40 ~ 85° C
  2. Automatic RS-485 data flow control
  3. 3000 VDC isolation protection
  4. Surge protection RS-485 data line
  5. Transmission speed up to 115.2 Kbps
  6. Networking up to 1200 meters (4000 feet)
  7. Reserved space for termination resistors
  8. Power and data fl ow indicator for troubleshooting
  9. Power requirement: +10 to +30 VDC w/power reversal protection
  10. Mounts easily on a DIN-rail, panel or piggyback


Comparar Mas
7-Ch RTD Input Module
  1. I/O Type: 7 RTD
  2. 10/100Based-T Ethernet
  3. Supports multi-channel/multi-range
  4. Pt 100/1000, Ni, Balco 500
  5. Wiring burn-out detect function


Comparar Mas
Page 1 of 2
Hablar con un Representante Ahora!

Por favor ingrese su información aquí debajo, y uno de nuestros representantes los contactara a la brevedad

Verificationtxt Result  Captcha Change

Respetamos su privacidad y mantendremos su información personal completamente confidencial como expresamos en nuestra política de privacidad

Copyright © 1983–2016 Advantech Co., Ltd. All Rights Reserved